About Asbestos Exposure
Is there a medical test for exposure to asbestos?
Normal chest X-Rays do not detect asbestos fibers. There
are tests that can detect asbestos in bodily fluids, but these
are not particularly useful in predicting the on-set of asbestos
diseases because everyone has some asbestos in his or her
body. High levels of asbestos can indicate exposure to asbestos,
but that doesn't necessarily mean you will develop mesothelioma
or asbestosis.
Doctors focus more on symptoms that may indicate the onset
of disease, and use any indication of asbestos exposure as
another factor in making their diagnoses.
One reason asbestos is such a health hazard is that it is
so insidious. It's a rock. The body doesn't break it down,
and it can build up in the food chain.
Exposure to asbestos
In our modern industrial society, everybody has been exposed
to ambient levels of asbestos in the air and water. The material
was so widely used and is still present in so many buildings
that it is impossible to escape all exposure. Public health
officials focus on people who have been exposed to high levels
of asbestos, usually at their workplaces.
Of particular concern are people who worked before 1975 in
- Shipyards
- Pipe fitting
-
Plasterers
-
Power Plant Workers
-
Drywall Tapers
-
Roofers and slaters
-
Oil refinery workers
Also of concern are
-
Family members of asbestos workers
-
Long-time residents of towns with asbestos plants or mines
What are the safe levels of asbestos?
Many scientists have concluded that there are no safe levels.
The federal Environmental Protection Agency has established
a limit of 7000 long asbestos fibers per cubic centimeter
for drinking water.
In 1986 the Occupational Safety and Health Administration
issued two standards, one for occupational exposure to asbestos
in general industry workplaces, the other applicable to construction
workplaces. The standards shared the same permissible exposure
limit and most ancillary requirements. Both standards reduced
the 8-hour time weighted average permissible exposure limit
tenfold to 0.2 fibers/cubic centimeter from the previous 2
fibers/cc limit. Specific provisions were added in the construction
standard to cover unique hazards relating to asbestos abatement
and demolition jobs.
|